Conical rock crusher-conical crusher-conical crusher-Leida manufacturers explain the necessary equipment for mining equipment. The conical stone crusher has novel, unique, simple and reasonable structure, balanced operation and low operating cost. The main body of the cone-shaped stone-breaking machine is a cast steel structure, and a reinforcing rib is arranged at a high stress point of the heavy load part. Tapered roller bearings are mounted on both ends of the cone crusher drive shaft. The power drive is completed by heavy-duty bevel gears. The bearing housing adopts a skeleton seal to prevent oil leakage. The cone crusher has inner and outer copper sleeves (ie inner and outer copper), a steel spherical seat and a spherical copper. The dust ring floats by a spring placed in the spherical seat and regulates the machine during operation. The cone crusher includes a hydraulic adjustment mechanism to quickly adjust the size of the taper discharge opening. The upper and lower parts of the body frame are connected by a plurality of heavy-duty cylinders, which are reliable in locking and convenient in clearing the cavity. The conical stone breaker provides hydraulic nitrogen bottle release protection. The cone crusher uses an external lubrication system that includes an oil pump, fuel tank, and piping. The crusher will be automatically turned off when the oil temperature is too high or the oil flow rate is too slow.
Conical rock crusher cone crusher is an advanced hydraulic crusher with high power, large crush ratio and high productivity. The machine was developed on the basis of digesting and absorbing various types of conical crushers with international advanced level in the 1980s. It is clearly different in design from the structure of a conventional cone crusher and concentrates on the main advantages of the various types of cone crushers known to date. Suitable for fine crushing and ultra-fine crushing of hard rock, ore, slag, refractory materials, etc.
Introduction to the structure of the cone-shaped stone-breaking machine and its main parameters: the structure of the cone crusher mainly includes the frame, horizontal axis, moving cone, balance wheel, eccentric sleeve, upper broken wall (fixed cone) and lower broken wall (moving cone) , hydraulic coupling, lubrication system, hydraulic system, control system and other components.
Conical stone breaking machine (cone breaking) is widely used in metallurgical industry, building materials industry, road construction industry, chemical industry and silicate industry. The cone crusher is used for medium and fine crushing of various ores and rocks with a Platts hardness of f ≤ 5-16. The structure of the crusher consists of the main part of the frame body, adjusting device, adjusting sleeve, crushing cone, transmission and eccentric sleeve, and auxiliary parts such as electric and lubrication. PY series cone crusher is divided into three types: coarse crusher cone crusher, medium crush cone crusher and fine crusher crusher. This series of crusher is suitable for crushing various ores and rocks with medium hardness. The type of crushing chamber is determined by the use of ore, the standard type is used for medium crushing; the medium type is suitable for medium and fine crushing; the short head type is suitable for fine crushing. Can be purchased according to different needs of users.
When the cone type rock breaking machine is working, the rotation of the motor is rotated by a pulley or a coupling, a transmission shaft and a conical portion under the eccentric sleeve, so that the broken wall of the crushing cone is close to and then leaves. Fixing on the adjusting sleeve is to roll the surface of the white wall, so that the ore is continuously subjected to impact, extrusion and bending in the crushing chamber to achieve the crushing of the ore. When the unbreakable foreign matter passes through the crushing chamber or the machine is overloaded for some reason, the spring insurance system realizes the insurance, the discharge port is enlarged, and the foreign matter is discharged from the crushing chamber. If the foreign matter is stuck in the ore, the clearing system can be used to continue the discharge. Increase, the discharge port is automatically reset, and the machine resumes normal operation. This series of crushers are divided into coarse crushed, medium crushed and finely crushed, which can be purchased according to different needs of users.
Technical parameters of conical stone breaker
| model | Fracture cone diameter | Maximum feed size | Discharge opening width | Processing capacity | Motor Power
(kw) | Spindle swing | Weight (t) | Dimensions (length × width × height) |
| Type |
| PYB | 600 | 600 | 65 | 12-25 | 40 | 30 | 356 | 5 | 2234×1370×1675 |
| PYD | 35 | 3-13 | 12-23 | 5.5 | 2234×1370×1675 |
| PYB | 900 | 900 | 115 | 15-50 | 50-90 | 55 | 333 | 11.2 | 2692×1640×2350 |
| PYZ | 60 | 5-20 | 20-65 | 11.2 | 2692×1640×2350 |
| PYD | 50 | 3-13 | 15-50 | 11.3 | 2692×1640×2350 |
| PYB | 1200 | 1200 | 145 | 20-50 | 110-168 | 110 | 300 | 24.7 | 2790×1878×2844 |
| PYZ | 100 | 8-25 | 42-135 | 25 | 2790×1878×2844 |
| PYD | 50 | 3-15 | 18-105 | 25.3 | 2790×1878×2844 |
| PYB | 1750 | 1750 | 215 | 25-50 | 280-480 | 160 | 245 | 50.3 | 3910×2894×3809 |
| PYZ | 185 | 10-30 | 115-320 | 50.3 | 3910×2894×3809 |
| PYD | 85 | 5-13 | 75-230 | 50.2 | 3910×2894×3809 |
| PYB | 2200 | 2200 | 300 | 30-60 | 59-1000 | 280-260 | 220 | 80 | 4622×3302×4470 |
| PYZ | 230 | 10-30 | 200-580 | 80 | 4622×3302×4470 |
| PYD | 100 | 5-15 | 120-340 | 81.4 | 4622×3302×4470 |
Http://news.chinawj.com.cn
Submission:
Submission: 
