Cone crusher repair and maintenance
July 01, 2022
Equipment maintenance technology: The cone crusher is used in the road and bridge industry, and is also a widely used crushing machine in the application field.
The design of the machine is unique, so the maintenance rate of the machine is very low, but the daily problems of the machine should be solved by itself, no need to call the manufacturer to send technicians to repair, how many sections shorten the repair time It saves maintenance costs and greatly increases production.
As far as the problem occurs in the daily work of the cone crusher, the factory personnel can repair it when there is a problem with the machine.
1. Will the machine suddenly stop when it is broken?
* The instability of the voltage, coupled with the excessive entry of materials, will also form a material gambling game.
2. Why does the output of the machine not meet the factory standards?
First look at the motor motor, and then the strip motor wiring. The discharge opening is adjusted to the nominal discharge opening specified in the instruction manual and the cone for the fine crushing is added. There is also the need to check the wear size of the crushing chamber. If it does not meet the standard, it is necessary to replace a loss-consuming part, and also increase the voltage of the work site to adapt it to the heavy load requirement of the host;
After zui, look at whether the bearing or the impeller of the cone crusher should be replaced.
3. Why is there a abnormal impact sound in the broken cavity of the cone?
First check or replace the tension spring; then replace the tie rod; after the Zui, check the crusher cavity for unbreakable foreign objects.
If all three of these have been done, then in the future production, many small problems will be avoided, and it is obvious to increase the output. Temperature problem of small high-speed pulverizer——Operation time control worm wheel grinding machine maintenance and maintenance Automatic chamber filter press installation and maintenance Centrifugal chiller maintenance and repair Reciprocating compressor connecting rod bushing failure and elimination of 300MW turbine high pressure adjustment Valve surfacing repair solution
