What problems will occur with the cone crusher?

During the round trip, there is also a mutual impact between the materials. As the material is hit by the hammer, the impact with the counterattack and the collision between the materials, the material continues to crack, loose and smash. When the material particle size is smaller than the gap between the counterattack plate and the hammer, it is discharged.

The cone crusher is widely used in stone production lines in hydropower, highway and other industries. Three-cavity crushing zone, the rotor is connected by a keyless taper sleeve, high-efficiency wear-resistant hammer, inserting and mounting form, inclined bearing seat, unique tooth-shaped counter-attack lining, multi-directional opening of the frame, screw or hydraulic opening device can be replaced easily Damaged parts, maintenance is more convenient.

Through the working principle of the above crusher, the problems of the cone crusher during operation are analyzed.

Q: What problems will occur during the operation of the cone crusher?

A. The method of removing the bearing temperature of the cone crusher is too high: 1 Check if the grease is proper, the grease should be filled with 50% of the bearing housing volume; 2 clean the bearing, replace the grease; 3 replace the bearing.

B. Elimination of knocking sound inside the cone crusher machine. 1 Stop and clean the broken cavity. 2 Check the fastening of the lining and the gap between the hammer and the lining; 3 Replace the broken parts.

C. Excavation method for excessive discharge of the cone crusher. 1 Adjust the front and rear counter-rack clearance or replace the lining plate and the plate hammer; 2 adjust the position of the counter-attack frame so that the gap between the two sides and the frame lining plate is even, and the lining on the frame is worn and replaced.